Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Steele Creek Homeowners
A chimney that hasn’t been looked at inside can hide creosote glaze, a cracked flue tile, or a nest packed into the smoke chamber, and none of that shows from the hearth. Chimney inspections in Steele Creek exist to find those problems before they become a fire risk or a carbon monoxide path into the house. We inspect before we recommend: nothing gets sold to you without photo evidence you can see for yourself. Our technicians have up to 12 years of experience, and they read a flue the way a tradesperson reads any system – looking for what changed since the last visit. Call (888) 848-8714. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Chimney Inspection Service Includes
We perform Level 1 and Level 2 chimney inspections as a standalone service, not as an upsell bolted onto a cleaning. Some homeowners book an inspection only. That’s a perfectly good reason to call. Here’s how each level works and when it’s the right one.
Level 1 Inspection
A Level 1 inspection covers the readily accessible parts of the chimney and venting: the firebox, damper, smoke chamber, flue from the top and bottom where reachable, the cap, and the exterior where it meets the roof. You need it when the chimney is in regular use and nothing has changed – no new appliance, no chimney fire, no remodeling. In Steele Creek we read it as a maintenance baseline, so the next inspection has something honest to compare against.
Level 2 Inspection
A Level 2 inspection adds a camera run through the full flue, the accessible attic and crawl space, and the connections to the appliance. It’s the level required after a chimney fire, a flue liner change, a switch to a different fuel or appliance, or a sale of the home. We treat Level 2 as the default whenever there’s any real question about the flue’s condition, because the interior of a liner can fail in ways no flashlight at the firebox will reveal.
Level 3 Inspection
A Level 3 inspection is diagnostic and it means access: removing a section of chimney chase, cutting into a wall, or opening up masonry to reach a concealed flue. It’s the right call only when a Level 1 or Level 2 turned up evidence of a hidden problem – a liner gap behind the facing, water tracking inside a chase, a flue that doesn’t line up with the appliance. We don’t recommend Level 3 lightly, and we tell you up front what has to be opened and why.
Camera Inspection
A camera inspection sends a lighted video head down the flue and records what it passes. What matters is that you watch it with the technician: cracks between tiles, offset joints, gaps at the flue collar, and heavy creosote glaze all show clearly on camera. The footage and a written photo report come with the visit, so the record is yours to keep and to compare next time.
Flue Inspection
A flue inspection is focused on the liner itself – condition, sizing, and whether the flue actually matches the appliance venting into it. A wood stove or a gas appliance connected to a flue sized for something else drafts poorly and deposits creosote where you don’t want it. We check the flue’s interior surface and clearances, then tell you plainly whether it’s serviceable, restorable with HeatShield ceramic resurfacing, or due for a DuraFlex liner.
Real Estate Inspection
A real estate inspection is a chimney evaluation timed to a closing, and it needs to be documented well enough to survive a negotiation. We inspect the chimney system, run the camera, and produce a written report with photos itemizing what’s deficient and what’s cosmetic. Buyers and sellers both get the same document, which keeps the conversation about the chimney and not about who said what.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
We install and work with a curated roster of professional-grade chimney product lines, and we know how each one ages. DuraFlex flexible liner systems are the benchmark for relining aging or damaged flues, and we inspect them looking at the specific wear points where a flexible liner stresses: the top clamp, the transition at the damper, and the bottom connection. HeatShield ceramic resurfacing is engineered for restoring deteriorating flues without demolition, so when we see a flue that’s a candidate, we know how to read the surface for what HeatShield can and can’t save. Gelco and Famco chimney caps protect against water damage, animal entry, and downdraft, and many of the cap failures we find at inspection trace to a cap that was the wrong fit from the start.
Whether you have DuraFlex, HeatShield, Gelco, Famco, Olympia Chimney, Copperfield, or any other make, we can help. An inspection is the same job regardless of what’s installed – we look at the system as it is, on your roof and in your flue, and report what we see. If you’re starting from scratch and want to understand the service itself, the chimney inspection page covers the fundamentals.
Signs You Need Chimney Inspection Right Now
Not every sign means an emergency. But some of them mean you shouldn’t burn again until someone has looked, and the difference between the two is worth knowing.
- A chimney fire you suspect happened. A chimney fire can sound like a low rumble or a train, and it can happen with little noise at all. Creosote that burned can leave a cracked liner behind, and only a camera inspection will show the damage.
- Water stains on the ceiling or chimney breast. Rust-colored streaks mean water is getting past the cap, the crown, or the flashing. That water attacks the masonry and the mortar joints around the flue, and it doesn’t dry out on its own.
- A strong smoky smell when the fireplace isn’t in use. That’s a draft or pressure problem, and it can push combustion gases back into the room instead of up the flue. It’s a carbon monoxide concern, so treat it as a stop-and-check signal.
- Birds, squirrels, or nests in the firebox. An uncapped or failed cap lets animals in, and a nest in the flue blocks the draft and is combustible. We remove it and inspect what the animal damaged getting in.
- Buying or selling a house. A real estate inspection before closing tells both sides what the chimney actually needs. It’s far easier to price a problem before the keys change hands than after.
Our Chimney Inspection Process – Step by Step
An inspection is a diagnostic visit, and we run it in a set order so nothing gets skipped and nothing gets sold twice.
- 1
We talk first. Before anyone goes on the roof, we ask what you burn, how often, and what you’ve noticed – smells, smoke, stains, noise. That conversation tells us where to look hardest, and it’s often where the real answer is.
- 2
We inspect the firebox and accessible interior. Damper operation, firebox masonry, smoke chamber, and the flue opening. We’re checking for cracks, gaps, and the kind of heavy creosote glaze that signals a draft problem rather than just routine buildup.
- 3
We go to the roof. The crown, the cap, the flashing, and the flue tile from the top. Exterior masonry gets a close look for spalling, missing mortar, and a crown that has cracked and is letting water into the chimney body.
- 4
We run the camera. The flue gets a video run top to bottom, recorded, with the technician narrating what’s on screen. You see the same footage we do – cracks, offset joints, gaps at the liner collar, or a flue that’s cleaner than expected.
- 5
We write it up and walk you through it. You get a written report with photos, and we tell you what needs work now, what can safely wait, and what’s cosmetic. If your chimney needs sweeping before inspection can proceed, that’s a chimney sweep in Steele Creek and we’ll say so.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Steele Creek?
A typical Level 1 chimney inspection in Steele Creek runs $100 – $175, and a Level 2 with a full camera run typically falls in the $175 – $350 range. A Level 3 inspection is priced per job because it involves opening up the chimney structure, and the written estimate sets the final price in every case.
| Inspection type | Typical estimated range | What it covers |
|---|---|---|
| Level 1 inspection | $100 – $175 | Accessible firebox, damper, flue, cap, exterior |
| Level 2 inspection | $175 – $350 | Level 1 plus camera run, attic/crawl access, appliance connections |
| Camera inspection (standalone) | $125 – $250 | Recorded video run of the flue with photo report |
| Real estate inspection | $200 – $400 | Full inspection with written report for a closing |
| Level 3 inspection | Priced per job | Diagnostic access into concealed chimney sections |
What moves the price: how many appliances connect to the chimney, whether there’s a second flue, whether the roof is steep or the chimney is offset, and whether a sweep is needed first. The way to avoid overpaying is to ask for the level in writing and see the camera footage before you agree to any repair. Our estimates are free, and nothing is recommended without camera evidence.
Chimney Inspection Near Steele Creek – Our Service Area
We work across Steele Creek and out to Mountain Island, Belmont, Cramerton, Sedgefield, Wesley Heights, Dilworth, Pineville, SouthPark, Myers Park, Eastover, and Quail Hollow. Response times depend on schedule and distance, so call and we’ll tell you what’s open. If you’re closer to Mountain Island, that chimney inspection page has the details for your side of the area.
Serving Steele Creek, NC – Our Local Coverage Area
We serve Steele Creek and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Steele Creek
A chimney inspection is a visual and camera evaluation of the whole chimney system – firebox, flue, damper, cap, crown, and exterior – to find damage, blockages, and creosote before they cause a problem. It’s a diagnostic visit rather than a cleaning, though the two are often booked together. We do Level 1, Level 2, and Level 3 inspections, and we perform them as a standalone service. Call (888) 848-8714 for an exact quote – estimates are free.
A Level 1 usually takes 30 to 45 minutes, and a Level 2 with a camera run typically runs 45 to 90 minutes. A Level 3 takes longer because it involves opening up the structure. The time depends on how many flues and appliances you have and how accessible the roof is. We’ll tell you up front what to expect for your chimney.
A Level 1 inspection in Steele Creek typically runs $100 – $175, and a Level 2 with camera typically runs $175 – $350. Real estate inspections and Level 3 work are priced per job by the written estimate. The estimate is free and sets the final price. Call (888) 848-8714 for an exact quote – estimates are free.
Only if the camera shows the existing liner has failed – cracked tiles, gaps at the joints, or a liner that’s the wrong size for the appliance. Many flues that look rough from the top are actually reasonable HeatShield candidates, and some are sound. We show you the footage and tell you if the work can safely wait. Call (888) 848-8714 for an exact quote – estimates are free.
Yes. We install and work with DuraFlex liner systems, HeatShield ceramic resurfacing, and Gelco and Famco caps, along with Olympia Chimney and Copperfield. During an inspection we know the wear points on each of those and what they look like when they’re failing. Whether you have one of those brands or something else, we can inspect and help.
We answer 24/7, and we dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening. Same-day scheduling is often possible depending on the day and the route. Call (888) 848-8714 and we’ll tell you what’s open.
Clear the hearth and the floor in front of the fireplace, and make sure an adult is home to let the technician in. If you have pets, put them somewhere safe before we arrive. Have your questions ready – what you burn, how often, and anything you’ve noticed about smoke or smell. That last part helps us more than anything else.
Schedule Your Chimney Inspection Service in Steele Creek Today
An inspection is the cheapest way to find out whether your chimney needs anything at all, and the only honest way to know for sure. Call (888) 848-8714 and we’ll book a visit. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and you’ll get a written report with camera photos either way. One call covers everything your chimney needs.
Written by the team at Chimney Sweep Steele Creek.