Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Beverly Woods
If your Beverly Woods chimney is topped by a flat concrete crown and an open flue, you’re losing heat, inviting water, and giving squirrels and birds an easy way in. We install and repair caps and crowns across Beverly Woods with professional-grade materials and a written estimate before any work begins. Beverly Woods homes sit in a part of south Charlotte where original 1960s and 70s masonry is still doing most of the work, so knowing these chimneys matters as much as knowing the trade. Call (888) 848-8714. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Beverly Woods Homeowners Call Chimney Sweep Steele Creek for Chimney Cap & Crown
We’re a chimney company, not a general handyman with a ladder, and that focus is what Beverly Woods homeowners tend to notice first. Our technicians have up to 12 years of experience, and they work the same roster of professional product lines on every job: Gelco and Famco caps, DuraFlex liners, HeatShield flue resurfacing. Nothing gets improvised.
When we look at a chimney in Beverly Woods, we start with the camera, not the catalog. The local pro we connect you with is licensed and insured as their state requires, and every recommendation comes with footage you watch yourself before you approve a single step. That’s how we handle a neighborhood where a lot of chimneys have sat unused for years and where homeowners are rightly wary of being told they need thousands of dollars of work.
We know the streets here, the brick ranches and split-levels off the main corridors near Beverly Woods Elementary and the greenway, and the way their chimneys were built. One call covers the cap, the crown and the flue inspection together, so you’re not handing the job to a second contractor halfway through.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Beverly Woods
Cap Installation in Beverly Woods
A properly sized cap keeps rain, animals and downdraft out of your flue, and on a Beverly Woods ranch it’s the cheapest protection you can add to an original masonry chimney. We fit caps from Gelco and Famco to the actual flue dimensions, with a screened or louvered design that suits how the chimney drafts. We install the cap after we’ve inspected the flue, never as a cosmetic patch over damage nobody has looked at.

Cap Replacement in Beverly Woods
Rusted, bent or undersized caps are common on Beverly Woods homes where the original cap has been through decades of humid summers and hard freezes. A replacement cap is a straightforward job once we’ve confirmed the flue below it is sound. If the camera shows cracked clay tiles, we tell you that before we sell you a new cap, because a fresh cap on a failing liner doesn’t fix anything.

Crown Repair in Beverly Woods
The crown is the concrete cap on top of the chimney stack, and in Beverly Woods it’s usually the weak point. Repair work here ranges from patching hairline cracks to rebuilding a crown that has lost its overhang, and we use a proper sloped, overhanging crown so water sheds away from the masonry the way it should have from the start. We don’t rebuild a crown to hide a flue problem below it.

Crown Coating in Beverly Woods
A crown coating seals small cracks and spalling edges before they widen into a rebuild, and for many Beverly Woods chimneys that’s the right middle step. HeatShield ceramic resurfacing is a product built specifically for restoring flue and surface material, and it sits between a full reline and doing nothing. We only recommend coating when the structure underneath is still sound enough to hold it. For the full range of what we do, see our chimney cap & crown work.
Trusted Brands We Service in Beverly Woods
We work with six professional chimney product lines: DuraFlex for flexible relining, HeatShield for ceramic flue resurfacing, plus Gelco, Famco, Olympia Chimney and Copperfield for caps, crowns and the hardware that ties the system together. These are trade-grade materials, not off-brand substitutes, and they’re what we reach for on every Beverly Woods job. We don’t stock parts locally or run a warehouse. When a component needs replacing, it’s sourced to the job, and we schedule the work around the material lead time so you know what to expect. The cap or crown we fit on a Beverly Woods chimney is meant to last decades, not seasons.
Common Chimney Cap & Crown Problems We See in Beverly Woods Homes
The single biggest pattern in Beverly Woods comes straight from how these homes were built. Most 1960s and 70s ranches here have original clay-tile flues capped by a crown poured flat, with no overhang at all. Charlotte’s humid summers let water wick back into the mortar and crack the tiles from the top down, and this specific failure shows up in Beverly Woods more than in neighboring areas with later construction. The fix starts with understanding that.
- Flat crowns with no overhang. Water sits at the edge of the stack, works into the mortar joints, and freezes and spalls the brick. A sloped, overhanging rebuild or a coating that sheds water is usually the answer.
- Cracked original clay-tile liners. Decades of thermal cycling crack tiles that go unnoticed because the fireplace is now used only occasionally for gas logs. The camera finds them.
- Rusted, painted-over dampers. A damper that won’t open properly traps moisture and blocks draft. It’s a sign the flue has never been swept and the tiles need a look.
- Animal nests in dormant flues. Birds and squirrels move into an open chimney that hasn’t had a fire in years, and a proper cap is what keeps them out once the flue is cleared.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Beverly Woods, NC
These are typical estimates for the Beverly Woods market, not final quotes. A written estimate sets the final price after we’ve seen the chimney.
- Standard single-flue cap installation: $250 – $575
- Multi-flue or custom cap: $450 – $1,100
- Crown repair (patching, crack sealing): $300 – $700
- Crown coating (HeatShield or similar): $450 – $900
- Full crown rebuild with proper slope and overhang: $800 – $1,600
What moves the number is the size of the chimney, how many flues it serves, whether the crown needs patching or a full rebuild, and how much of the surrounding masonry has spalled. A flat crown with no overhang usually costs more to correct than one that just needs sealing, because there’s more to build back. The estimate itself is free, and we don’t recommend a rebuild when a coating will hold. Call (888) 848-8714 for an exact quote.
We Also Serve Cities Near Beverly Woods
The same cap and crown work reaches the neighborhoods around us. We work throughout Beverly Woods, and we also serve Quail Hollow, Pineville, SouthPark and Cotswold. If you’re just over the line in one of those areas, the same inspection-first approach applies. Call and we’ll confirm the details for your address.
Serving Beverly Woods, NC – Our Local Coverage Area
We serve Beverly Woods and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Beverly Woods
A flat crown with no overhang can often be repaired or recoated, but a crown that’s cracked through or has lost its slope usually needs a full rebuild to shed water properly. We look at the crack pattern, the spalling at the edges, and how the crown meets the flue before we advise. If a coating will hold, we say so. Call (888) 848-8714 for an exact quote; estimates are free.
Yes. An unused flue is often the one that needs the most attention, because moisture and animal nests move in while nobody’s watching. Gas logs also leave the flue prone to moisture damage, and the crown above it keeps degrading whether or not there’s a fire below. A cap plus an inspection catches both. Call (888) 848-8714 to book it.
Third-degree creosote is a hard, glazed, tar-like coating on the flue wall, and it won’t brush out with a standard sweep. It forms after repeated fires and then sits there for years in a dormant Beverly Woods flue. A cap prevents new creosote by keeping rain and debris out, but it can’t remove what’s already baked on. That takes a proper assessment and often a resurfacing or relining step. Call (888) 848-8714 to see what the camera shows.
Spalling around the edges after an ice storm is usually a rebuild, not a coat, because the brick face has already broken away and there’s nothing solid for a coating to bond to. Coating works on hairline cracks and surface wear, not crumbling masonry. We confirm with photos and a close look before recommending either. Call (888) 848-8714 for a free estimate.
Yes. Multi-flue caps are built to the exact dimensions of the chimney top, so an original clay-tile stack on a Beverly Woods split-level can be fitted with a cap that covers every flue opening at once. We measure the flues and the crown, then size the cap to match. That’s typically a custom cap in the $450 – $1,100 range. Call (888) 848-8714 to set up the measurement.
Get Your Beverly Woods Chimney Capped and Crowned Right
If your Beverly Woods chimney has a flat crown, an open flue, or a cap that’s seen better decades, we’ll inspect it with a camera first and show you exactly what’s there before anything is recommended. No guesswork, no upselling, no work sold that your chimney doesn’t need. Call (888) 848-8714 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Steele Creek.